BX-1000 Washable fluorescent penetrant
BX-1000 is a general-purpose low-sensitivity water-washable fluorescent penetrant, which can be used for aluminum alloy, steel, nickel-based alloy, and titanium alloy. It is usually used to check the opening defects of workpieces with rough surfaces, such as pores and cracks in welds, folds on castings, forgings, and extruded parts, cold isolation, delamination, etc. It has a high flash point, so it can be safely used in open containers. In line with the requirements of low sulfur and low halogen elements, BX-1000 is a testing material approved for production.
Features:
1. Under visible light conditions, its own background approaches zero;
2. Can quickly provide obvious contrast, clear and accurate defect display;
3. After decades of practical use, it has proved that it has excellent electrostatic discharge performance;
4. The molecular structure is stable, not volatile, and has a long service life;
5. The viscosity is moderate, the material sticks slightly, and the consumption is low;
6. Clean, tasteless, and can be exposed to the air naturally;
7. Wastewater treatment is extremely easy, and the COD value after wastewater treatment is significantly reduced;
8. If the regulations allow, the imaging agent may not be used;
9. Even if it is cleaned for a long time, it is not easy to cause excessive cleaning of the defective part;
10. Superior cleaning performance and short cleaning time effectively reduce the amount of cleaning water;
Container size: 20L drum (bulk)