XRP-3000 black and white illuminance meter / black illuminance meter

XRP-3000 black and white dual-purpose illuminance meter kit includes host XR-1000, dual-wavelength probe XDS-1000, waterproof USB connection XCB-100 with adapter, host rubber protective cover XRB-100, suitcase XCC-100.

XRP-3000 black illuminance meter measures both ultraviolet and white illuminance at the same time, meeting the requirements of MIL and ASTM for magnetic particle and penetration testing. XRP-3000 illuminance meter is mainly used to measure the illuminance of flaw detection black light lamps.

The XRP-3000 black and white illuminance meter is mainly used in the flaw detection industry (NDT) to measure the ultraviolet output and white light intensity of the ultraviolet flaw detection lamp. The biggest advantage of the XRP-3000 black and white illuminance meter is that the white light and the ultraviolet sensor are made together. Simultaneously measure the intensity of white light and ultraviolet light. XRP-3000 is composed of XR-1000 host and xds-1000 sensor.

High precision:

   AccuMAX XRP-3000 black and white dual-purpose illuminance meter uses a dual-wavelength detector, which can simultaneously measure UVA (black light) ultraviolet intensity and white illuminance. It has functions such as automatic reset, accumulated irradiation energy, and signal retention. The provided UV and white light intensity display, in order to ensure consistent results, the sensor is designed with an advanced band-pass color filter, and its light stack is assembled on a class 100 clean bench. In order to obtain the spectral range, a high-quality interference color filter is used to delay aging.

● Strong and durable

  The sturdy main casing is equipped with a removable rubber protective cover, which is convenient to hold and operate and helps prevent accidental damage. At the same time, it provides protection against moisture, impact and humidity. Moreover, XRP-3000 is equipped with a liquid-proof and waterproof sealed sensor housing with a special self-sealing ring, which helps reduce light leakage.

● Easy to operate

  The XRP-3000 microprocessor is easy to use and operate. All functions can be completed with only four pressure sensing buttons on the panel. For example: in order to reduce the ambient light, the user only needs to press the "Zero" button to activate the auto-zero function, set the value to "0", and the subsequent measurement will display the relative reading. The "HOLD" hold function will freeze the display, and the UV energy and average UV intensity during the time after the "INTG" display. These functions and other user-selectable parameters can be easily accessed through the main menu and sub-menus of the software.

● Reliable

  The XRP-3000 strength meter has undergone strict quality control to ensure its advanced calibration and meet the demanding measurement requirements. The host is housed in a sturdy polycarbonate box with an independent solid-state optoelectronic circuit, which can operate without failure for a long time.

● Portable

  XRP-3000 is compact, light and battery operated, which is convenient for factories, on-sites and other applications. Slide out the panel to easily replace the 9V battery of the device.

● General

  XRP-3000 provides more functions. By adding the XS-555/L sensor, the ray technician can use it to measure the brightness of the film viewer. The display unit is candela/m2 (cd/m2), candela/ft2 (cd/ft2) or foot-Lambert ( fL).

Features

● The micro-processing control host supports the simultaneous working of black light and white light sensors.

● Wider detection range, UVA (black light) range 0-100mw/cm2 (100000 uwcm2), white light range 0-5300 lux. According to the measurement result, the range and display unit are automatically switched.

● High-precision UV intensity resolution up to 1uw/cm2, white light intensity resolution up to 0.01lux (white light display unit is lux or foot candles, switchable.

● It can display the maximum intensity and average intensity of the ultraviolet irradiation dose and the irradiation time

● The bandpass interference color filter. .

● The detector can be directly connected to the host, or the detector can be connected to the host through a USB connection.

● The cosine curve response.

● User-definable power saving mode and automatic shutdown function.

● Large, easy-to-observe liquid crystal display.

● Sealed sensor housing and waterproof USB connector.

● It can be used for the brightness detection of X-ray film viewers. The display unit is candela/m2 (cd/m2), candela/ft2 (cd/ft2) or foot-Lambert (fL).