Warm water fluorescent penetrant flaw detection equipment HW-1
Warm water fluorescent penetrant testing equipment HW-1 is a fluorescent penetrating testing equipment that uses our newly developed penetrant and warm water for cleaning.
Features:
● The newly developed water-based penetrant has ultra-high sensitivity (not easy to be cleaned).
● Compared with the previous water-washed penetrant flaw detection equipment, it occupies 1/2 of the area.
● Compared with the previous water-washed penetrating flaw detection equipment, it has twice the processing capacity.
● Compared with the conventional water-washed penetrant testing equipment, the drainage volume is 1/2 of the previous one.
● The newly developed penetrant has a very low COD value, which effectively reduces the burden of wastewater treatment.
Main specifications | |
Object artifact | Size: 700W×400D×300Hmm |
Dimensions and weight | Within MAX.30kg |
Inspection conditions | Penetration treatment: spray |
Cleaning treatment: warm water cleaning | |
Drying treatment: blowing | |
Observation: Observe through ultraviolet flaw detection lamp in the inspection room | |
Flaw detection agent | Fluorescent penetrant：Eco Glo EG-300 |
Power supply | AC200/220V±10％ 50/60Hz 3Φ |
Gas source | 0.4MPa or more 1.0Nm3/min or more connection diameter 40A |
Cooling water | Pressure: Above 0.1MPa Industrial water |
For water supply/drainage: connection size 25A/50A | |
Power consumption | Usually 50KVA |
Beat | Approximately 2.5 minutes |
