Non-draining fluorescent penetrant flaw detection equipment MH-1
The non-drainage PT device MH-1 does not need to discharge the cleaning water,
Will not incur huge waste water treatment costs.
In addition, the flaw detection speed of this equipment is more than 2 to 3 times that of water-washing equipment.
Whether it is environmental issues or production capacity, it can bring multiple effects.
Features:
● No need for wastewater treatment equipment. The solvent used for cleaning can be recycled and reused.
● Use quick-drying solvents without drying equipment.
● Greatly improve the flaw detection processing capability.
● Use the non-imaging method, without imaging processing.
Main specifications | |
Conveying device | Lifting/transporting: automatic/manual |
Object artifact | Size: 600W×600D×200Hmm |
Dimensions and weight | Weight: within MAX 30kg |
Inspection conditions | Penetration treatment: soaking method |
Cleaning treatment: solvent removal method | |
Drying treatment: volatile and natural drying | |
Observation: Observe through ultraviolet flaw detection lamp in the inspection room | |
Flaw detection agent | Fluorescent penetrant: RP-2000C |
Cleaning agent: BP-3 | |
Power supply | AC200/220V±10％ 50/60Hz 3Φ |
Gas source | 0.4MPa or more 0.5Nm3/min or more |
Cooling water | Pressure: above 0.1MPa industrial water |
For water supply/drainage: connection size 15A/25A | |
Power consumption | 20KVA |
Beat | About 5 minutes |
